Forskjell mellom versjoner av «Evaluering i TFY4190 Instrumentering»

Fra NablaWiki
Gå til: navigasjon, søk
(Diverse)
(kategori)
 
Linje 95: Linje 95:
 
*A 300 ohm transmission line is terminated with a standard 50 ohm pure resistive termination. A signal is transmitted on the line.
 
*A 300 ohm transmission line is terminated with a standard 50 ohm pure resistive termination. A signal is transmitted on the line.
 
  There will be a phase reversal of the reflected signal
 
  There will be a phase reversal of the reflected signal
 +
 +
[[Kategori:Fysikkfag]]

Nåværende revisjon fra 3. nov. 2011 kl. 13:58

I faget Instrumentering består deler av evalueringen av en fire-timers prøve, der alle bøker samt Internett er tillatte hjelpemidler. I den forbindelse kan det være greit å ha en oversikt over nettsider med relevant informasjon. Linkene er forsøkt sortert slik pensumlisten er inndelt, enn hvor ulogisk den kan være.

Generelt

Lab-oppgaver

Tall i datamaskiner

Flyttall

Representasjon av negative tall

Støy

Støytyper

Data-konvertering

AD-convertere

Sampling

Signaloverføring

Diverse

Flervalgsoppgaver

Før evalueringen våren 2007 ble der lagt ut eksempeloppgaver. Under følger et utvalg av disse med svar.

  • An anti-alias filter is
Placed berore the input to remove frequencies above the Nyquist limit
  • The resolution of a DAC depends on
The number of bits
  • A LabVIEW program gives the value of an integer as 65534. You know that this actually is a small negative number, but represented as an unsigned 16-bit integer. The small number is
-2 
  • In addition to letters and numbers, the 7-bit ASCII code has codes for
Codes for communication control
  • If the transfer function of a regulator has poles in the right half plane
The output will increase exponentially with time
  • Suppose we have a small signal in the range 0 - 2 mV. It can be amplified by a factor of 1000. We have the choice of two AD converters, one 12 bit with range ± 10V and one 10 bit with range 0 - 5V. Which one has the best resolution?
They are equal
  • Thermocouples need zero-point correction because
Their output gives the temperature difference between two junctions
  • Shot noise has a frequency dependance that is called
White noise 
  • One of the following units is not used for magnetic fields:
Henry
  • The transmission velocity of a signal on a coaxial line depends mainly on
The dielectric
  • Which of these number representations have more than one representation for zero?
Sign + magnitude AND 1-complenent. (there is an error in the question, so it is removed from the test)
  • A LabVIEW program is used to read the output of a 12-bit AD converter with range ± 10V. The binary output is available in 2-complement form. By some reason, the program gives the result in hex as C8A. Then the voltage is
-4,33 V
  • A 300 ohm transmission line is terminated with a standard 50 ohm pure resistive termination. A signal is transmitted on the line.
There will be a phase reversal of the reflected signal